oursupport.com

Dry 70/102

Paperplast

  • 1342635
  • 2008
  • Spain
  • Binding / Finishing equipment
  • Laminating machineries
  • Paperplast
  • Dry 70/102

View Details Paperplast Dry 70/102

  • 2008
  • Usable working width: mm 1050
    Mechanical speed: m/min 70*
    Max. output of sheet-feeder: sheets/hour 10.000
    Minimum sheet size: mm 250x280
    Maximum sheet size: mm 1050x1400
    Max. reel diameter in unwinding: mm 500
    Diameter cores hole in unwinding: mm 76
    ONE FIXED AXLE UNWINDER
    - Pneumatic brake.
    - Pneumatic roll-stand shaft with millimeter indicator for centering the reel.
    - Axial regulation of manual adjustment.
    - Manual side shifting of the unwinding shaft.
    FILM TRIMMER WITH A SIDE REWINDER OF THE TRIMMED EDGES (Max. trimmer width: mm 150)
    AUTOMATIC SECOND GENERATION SHEET-FEEDER “SAMAL®”
    - Feeding-head “SAMAL®” equipped with two independent carriages (one to lift and one to move the sheets).
    - INDEPENDENT ADJUSTMENT (left-right) of the inclination of the suction cups of the rear carriage.
    - Vacuum pump – if the customer want, we can replace it with Venturi system with no extra costs
    - Loading of the pile with transpallet on back-side or lateral side.
    INTRODUCTION OF THE SHEETS
    - Introduction table by suction transporting bands.
    - Electronic regulating device for size change with size selector.
    - Electronic overlap adjustment.
    - Roller for thin papers
    - Registers.
    - Safety photocell (for “missing-sheet”).
    LAMINATING UNIT
    - Calander with diameter 290 mm.
    - Counter pressure, double air space cylinder in rectified and chromium plated steel. It is internally heated by water, whose temperature is kept steady by an off-line (external) heater.
    - Rubber pressure roller, diameter 200 mm.
    - Pressure applied by two pneumatic actuators type “TORPRESS®”.
    - Drive with brushless motor.
    - Ajustable pressure up to 6 bar.
    AUTOMATIC SEPARATOR
    - Decurler-bar.
    - Cutting and separating device, for working in-line to the machine only.
    - Separating device with abrasive wheel.
    - Separating rollers (“snapping rollers”).
    - Drive with brushless motor.
    - Control panel.
    AUTOMATIC STACKER
    - Nos. 3 joggers: 2 lateral and 1 longitudinal types.
    - Regulation of the lateral joggers with rapid system for the change
    of the sheet size.
    - Pile table.
    - Automatic lowering of the table by chain.
    - Downloading of the pile with transpallet on the back or lateral side.
    ELECTRIC CONTROL BOARD
    ELECTRIC EQUIPMENT OF THE MACHINE WITH FIRE-PROOF CABLES
    PNEUMATIC EQUIPMENT OF THE MACHINE
    REMOVAL DEVICE FOR PRESSURE ROLLER
  • 1342635
  • US$ Make an offer
  • .
  • .
  • yes
  • Spain

get Details Paperplast Dry 70/102

Please add your questions in the form to get all the details for Dry 70/102 Paperplast